BMW has long pushed various efficiency and sustainability goals for it’s plants and products. And every component, process, method and material gets scrutiny. Including how the seats for BMW vehicles are made. BMW Group recently received the Enlighten Award in the Sustainable Process Category for the company’s work in developing new materials and processes used in building vehicle seats. Employing a combination of natural materials, additive manufacturing (a.k.a. 3D printing), and advanced construction methods, BMW developed a seat with a 90% lower CO2 footprint while increasing recyclability.
Read the full news release below.
__________
Michigan, USA. At an award ceremony at the 2024 Center for Automotive Research Seminar, Altair presented the BMW Group with this year’s prestigious Enlighten Award in the Sustainable Process category, celebrating the premium manufacturer’s progress in innovation. The annual award recognizes innovative lightweight construction and sustainability solutions across the global automotive industry that reduce carbon emissions, minimize water and energy consumption, and promote materials reuse and recycling.
BMW Group was recognized at the 2024 Center for Automotive Research Seminar with the Enlighten Award in the Sustainable Process category.
The BMW Group received the award for the BMW M Visionary Materials Seat on the grounds that the research project is a precursor of future product development: Standout achievements were the sustainable seat design and the focus on the entire product lifecycle, making it one of the most innovative and visionary sustainable developments in the global automotive sector.
In addition to BMW M GmbH as the project owner, BMW Group Designworks was responsible for the design, color and material concept of the seat in collaboration with the BMW design team. The project was realized in close cooperation with several partners: Automotive Management Consulting GmbH, Bcomp Ltd, Gradel Lightweight Sàrl and Lasso Ingenieurgesellschaft mbH.
Key themes: design for circularity, lightweight construction and attractive product
As a platform for research on the development of future materials, the award-winning seat focuses on the following key themes:
First, driving the use of plant-based materials and, as part of design for circularity, raising the share of secondary raw materials and increasing recyclability at the end of the lifecycle.
In addition, the team aimed to develop an attractive product in terms of its appearance, quality, lightweight construction and functionality. The minimalist design leaves the lightweight seat structure visible, highlighting its status as a core component. Intensive lifecycle assessments (LCA) complemented the design at each stage of development.
Falco Hollmann, Innovation Manager Lightweight Design & Sustainability at BMW M GmbH, accepted the award: “We are showing today what will be possible tomorrow with existing technologies and materials in order to take our efforts to reduce emissions and conserve resources to the next level. This is about more than just substituting materials; it is above all about designing for circularity.”
Use of natural materials
Carbon footprint reduced by 90 percent
The seat’s CO2e footprint is 90 percent lower than a BMW M carbon bucket seat made today, thanks to the use of ultra-light, robotically-wound fiber composite seat support structures and materials of natural origin as well as the high recycling rate. In addition, lower module complexity and the use of materials grouped by type make it easier to recycle the seat at the end of its lifecycle. The additive manufacturing processes used are also groundbreaking: A new technology made it possible to completely eliminate support structures, chemical post-treatment and finishing from the M BMW Visionary Materials Seat. Other priorities included a flat value creation chain and a minimum of finishing steps to save energy and conserve resources.
Lessons learned for future processes
“One of our biggest lessons was the balancing, in other words, how to model our process chain to generate missing primary data,” explains Roberto Rossetti, Head of Development Total Vehicle-Lifecycle at the BMW Group. “The data obtained provides new insights, both in terms of today’s negative contributing factors and the design of tomorrow’s processes. This experience provides a solid foundation for continuously improving sustainability and developing innovative solutions for forward-thinking mobility.”
Tags: award recycling sustainability